HOME > PRODUCTS

Get a Quote Now!

Request a quote for you next project and one of our specialists will assil you within the next business day!

Seat Occupancy Membrane Pressure Sensor for Car Seat

Name

E-mail

Subject

Message

Verification code

►Product name: Seat Occupancy Membrane Pressure Sensor for Car Seat

 
►Keyword:  Pressure Sensor,Pressure Sensor for Car Seat,Membrane Sensor for Car Seat,seat sensor,seat belt sensor.
 
Overview
The car seat sensor is a film type contact sensor in which the contacts of the sensor are evenly distributed on the force receiving surface of the seat, and a trigger signal is generated when the seat is subjected to pressure from the outside. Used in car seat occupant perception systems, such as seat belt alarm sensors,Taxi automatic meter, airbag sensing and driver departure. For example, with this device, it can sense if there is anyone in the seat, if there is no one, the airbag It won't open.

Design of seat sensor focuses on two perspectives: (1) the shape of the seat (2) the weight trigger value

①Shape of the sensor
The shape and size of the sensor are mainly based on the shape and size of the seat cushion.


In order to make the sensing point in the groove feeling the pressure from above the seat,we have to install the sensor in the core position of the seat cushion, the shape should be basically consistent with the seat, and the measuring point should avoid the grooves on the seat. The size of the sensor should also be the same as the size of the seat cushion, preventing the change in the sitting position of the passenger on the seat of the seat does not affecting the test results.

②The trigger weight value
The seat sensor (SBR) trigger weight is affected by the seat structure, the softness and hardness of the seat cushion, the installation position, and the material of the seat surface. If the same seat sensor was installed into different seat cushions, the performance on trigger weight value and sensitivity will be much different from each other.
In order to get the trigger weight value of SBR, we suggest to measure the surface of one sensing point of it, test the pressure value required for a single point trigger.
The trigger weight value of an adults seat cushion is 30kgs. If the trigger weight value can not meet your requirements, we have to make some modifications on the thickness, softness & hardness of the cushions filler.
Otherwise, we have to make some changes on the design of SBR to meet your requests on trigger weight value.


►Structure
►General Electrical Performances
Size Customized Working temperature -30~80℃
Single point working weight 150g~180g Insulation impedance 20MΩ
Trigger weight 30~ ∞ kg Static resistance >100MΩ
Working voltage < 50DC Trigger resistance 0-150Ω
Working current <100mA Durability >1000K times
Response time 10 ms    

 

►Product presentation

FSBS-001 Specification  FSBS-002 Specification  FSBS-003 Specification 
Model:FSBS-001
Work size:176*88mm 
Force range:30kg~∞ 
Connector:Optional
Model:FSBS-002
Work size:160*120mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-003
Work size:235*208mm
Force range:30kg~∞
Connector:Optional
FSBS-004 Specification  FSBS-005 Specification  FSBS-006 Specification 
Model: FSBS-004
Worksize:195*135mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-005
Worksize:125*110mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-006
Worksize:235*95mm
Force range:30kg~∞
Connector:Optional
FSBS-007 Specification  FSBS-008 Specification  FSBS-009 Specification 
Model: FSBS-007
Work size:170*25mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-008
Work size:118*93mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-009
Worksize:133*123mm
Force range:30kg~∞
Connector:Optional
FSBS-010 Specification FSBS-011 Specification FSBS-012 Specification
Model: FSBS-010
Work size:170*25mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-011
Work size:95*35mm
Force range:30kg~∞
Connector:Optional
Model: FSBS-012
Work size:175*21mm
Force range:30kg~∞
Connector:Optional
FSBS-013 Specification FSBS-custom Specification  FSBS-more Specification 
Model: FSBS-013
Work size:200*140mm
Force range:30kg~∞
Connector:Optional
Updating Model: FSBS-custom
Work size:custom
Force range:custom
Connector:Optional
Updating Updating


►Connector types (Others are available as per customer's requirement)

BS01 BS02 BS03 BS04 BS05 BS06

 

►Wiring types (Others are available as per customer's requirement)

C01 C02 C03

 

►Customized Manufacture
We accept orders for custom seat sensors.If you need to customize the production of seat sensors according to your needs, please inform us of the information.
(1) working size and shape of the sensor
(2) trigger weight
(3) lead length
(4) connector type
We will provide quotation and design scheme according to the information you provide.

Add: Room 207 , Building 3, Tongxin Garden Technology Innovation Center, 402 Yinfu Street, Jiangning District, Nanjing City,
Jiangsu Province,China
Telephone: +86-25-52104047 Ex. 806
Fax:+86-25-52104047 Ex. 800
Email: sales@flexkys.com
© 2014 Flexkys.com